Workshop Manual

8A–14
LIGHTING SYSTEM
Vanity Mirror Illumination Light Bulb
Removal
1.Disconnect the battery ground cable.
2.Remove the lens (1).
3.Remove the bulb (2).
805R200004
Installation
To install, follow the removal steps in the reverse order.
Switch Unit Assembly Illumination Light Bulb
(Power/Winter & Intelligent Suspension Switch)
Removal
1.Disconnect the battery ground cable.
2.Remove the center cluster assembly.
B Refer to
Instrument Panel Assembly in Body
Structure
section.
3.Remove the audio.
B Refer to
Audio in Entertainment section.
4.Remove the illumination light bulb.
825R200036
Installation
To install, follow the removal steps in the reverse order.