Workshop Manual

8A–18
LIGHTING SYSTEM
Rear Door Switch
Removal
1.Disconnect the battery ground cable.
2.Remove the door switch (2).
B Remove the screw (3).
B Disconnect the connector (1).
825R200039
Installation
To install, follow the removal steps in the reverse order.
Tailgate Lock Switch
Removal
1.Disconnect the battery ground cable.
2.Remove the tailgate outside handle.
B Refer to
Tail Gate Outside Handle in Security and
Locks
section.
3.Remove the tail gate lock switch (1).
B Disconnect the switch connector (2) and lock
actuator connectors (3).
825R200031
Installation
To install, follow the removal steps in the reverse order.