Workshop Manual

8B–10
WIPER/WASHER SYSTEM
Rear Washer Motor
Removal
1.Disconnect the battery ground cable.
2.Remove the fender panel (right side).
B Refer to Fender Panel in Body Structure section.
3.Disconnect the windshield washer motor connector
and the rear washer motor connector.
4.Disconnect the windshield washer hose connector
and the rear washer hose connector.
5.Remove the filler neck (3).
B Remove the bolt.
6.Remove the washer tank (2).
B Remove the three nuts.
7.Remove the rear washer motor (1).
B Pull out the motor from the washer tank.
880R200001
Installation
To install, follow the removal steps in the reverse order.