Workshop Manual

ENTERTAINMENT
8C–3
Rod Type Antenna
Removal
1.Disconnect the battery ground cable.
2.Turn the antenna rod (1) counterclockwise to remove
it.
3.Remove three screws and nine clips to remove the
fender inner liner (5).
4.Disconnect the feeder cable connector (4) at the
inside of the vehicle.
5.Turning the lock nut (2) counterclockwise removes it
together with the base mold (3).
6.Pull down and remove the housing (7) from the panel.
7.Pull and remove the cable with the grommet (6).
890R200040
Installation
To install, follow the removal steps in the reverse order.