Workshop Manual

ENTERTAINMENT
8C–19
No COMPASS, CLOCK, FUEL CONSUMPTION, or SERVICE Display
Step Action Value(s) Yes No
1 1. Remove the connectors from the display unit.
2. Turn the ignition switch to the ON position.
Is there approximately 5 volts across terminal No.
I-12–1 (display unit harness connector)?
5V Go to Step 2 Go to Step 5
2 Remove the connectors form the display unit.
Is there battery voltage between the No. I-12–7
terminal and the No. I-12–16 terminal (display unit
harness connector)?
12V Go to Step 4 Go to Step 3
3 Repair open circuit between terminal No. I-12–7 and
terminal No. I-12–16.
Is the action complete?
— Go to Step 2 —
4 Replace the display unit.
Is the action complete?
— Go to Step 1 —
5 Remove the MID connectors.
Is there battery voltage between the No. I-13–7
terminal, the No. I-13–8 terminal, and the No. I-13–16
terminal (display unit harness connector)?
12V Go to Step 7 Go to Step 6
6 Repair open circuit between terminal No. I-13–7,
terminal No. I-13–8, and terminal No. I-13–16.
Is the action complete?
— Go to Step 5 —
7 Replace the MID
Is the action complete?
— Go to Step 1 —