Workshop Manual

2A–36
POWER–ASSISTED STEERING SYSTEM
Combination Switch
Combination Switch and Associated Parts
431R200003
Legend
(1) Steering Column Cover
(2) Steering Wheel
(3) Inflator Module
(4) Combination Switch and SRS Coil Assembly
(5) Instrument Panel Lower Cover
(6) Driver Knee Bolster (reinforcement)
Removal
1.Turn the steering wheel so that the vehicle’s wheels
are pointing straight ahead.
2.Turn the ignition switch to “LOCK”.
3.Disconnect the battery ground cable, and wait at least
5 minutes.
4.Disconnect the yellow 2-way SRS connector located
under the steering column.
CAUTION: The wheels of the vehicle must be
straight ahead and the steering column in the
“LOCK” position before disconnecting the steering
wheel. Failure to do so will cause the coil assembly
to become uncentered which will cause damage to
the coil assembly.
5.Remove the engine hood opening lever, then remove
instrument panel lower cover.
6.Remove the driver knee bolster (reinforcement).