Workshop Manual

8F–48
BODY STRUCTURE
Installation
To install, follow the removal steps in the reverse order,
noting the following points:
1.When installing the hinge to the body, exercise
special care not to damage the body paint surface.
2.Align the tailgate fitting to the body.
B Check the roof and tailgate (1).
Clearance: 10.7 mm (0.42 in)
Height (step): –2 mm (0.08 in)
B Check the tailgate fitting to the rear quarter panel
(2), (4).
Clearance: 5.0 mm (0.196 in)
Height (step): Flush
B Check the tailgate fitting to the rear bumper.
Clearance: 6.5 mm (0.26 in)
Adjust clearance with tailgate hinges. Adjust height
(step) by tapping on the tailgate lightly with a rubber
hammer.
610R200011