Workshop Manual

8F–50
BODY STRUCTURE
Removal
1.Open the hatch gate and tail gate.
2.Remove the spare tire (3).
B Put the spare tire handle (1) to the center of upper
side of rear bumper (2) and turn counterclockwise.
Put spare tire down.
530R200001
3.Remove the spare tire support.
B Remove the four bolts that are fixed to frame cross
member.
4.Remove the spare tire hanger assembly.
B Remove the two fixing bolts.
Installation
To install, follow the removal steps in the reverse order,
noting the following points:
1.Install the spare tire firmly.
2.Tighten the spare tire support fixing bolts to the
specified torque.
Torque : 40 N·m (4.1 kg·m)
3.Tighten the spare tire hanger fixing bolts to the
specified torque.
Torque : 19 N·m (1.9 kg·m)