Workshop Manual

8F–51
BODY STRUCTURE
Windshield
Parts Location
607R200003
Legend
(1) Windshield Wiper Arm
(2) Windshield Upper Molding
(3) Windshield
(4) Windshield Side Molding
(5) Windshield Support
(6) Front Cowl Cover
(7) Hood Rear Seal
Removal
1.Disconnect the battery ground cable.
2.Remove the front pillar trim cover.
B Turn up the finisher and pry the trim cover clips free
from the body panel.
3.Remove the sunvisors and sunvisor holders.
B Refer to
Headlining in Exterior/Interior Trim section.
4.Remove the interior mirror.
B Refer to Interior Mirror Assembly in Exterior/Interior
Trim section.
5.Remove the windshield wiper arm.
B Refer to Windshield Wiper Arm/Blade in
Wiper/Washer System section.
6.Remove the windshield side molding.
B Pull the molding out from drip rail.
7.Remove the front cowl cover.