Workshop Manual

8G–10
SEATS
10.Remove the center hinge.
B Remove the two fixing bolts.
Installation
To install, follow the removal steps in the reverse order,
noting the following points:
1.Tighten the center hinge fixing bolts to the specified
torque.
Torque: 39 N·m (29 lb ft)
2.Tighten the side hinge fixing nuts to the specified
torque.
Torque: 29 N·m (22 lb ft)
3.Tighten the side lock striker fixing bolts to the
specified torque.
Torque: 19 N·m (14 lb ft)