Workshop Manual

SECURITY AND LOCKS
8H–3
3.Remove the power window switch (1).
B Pry the power window switch and remove the
connector.
635R200002
4.Remove the inside handle.
B Open the screw corer (1) and remove the screw.
B Disconnect the cable.
635R200003
5.Remove the door mirror cover.
6.Pull the door trim panel at the 8 clip positions (1).
B Disconnect the courtesy light and tweeter harness
connectors.
635R200005
7.Remove the pull box bracket.
8.Remove the inside lock bracket.
B Disconnect the cable.
9.Remove the waterproof sheet.
B Taking notice of the door harness, peel the
waterproof sheet off the door panel carefully.
10.Raise the glass up to the uppermost position.
11.Remove the door lock assembly.
B Disconnect the locking links and harness
connector.
B Remove the 3 fixing Torx screws and bolt.
632R200001