Workshop Manual

SECURITY AND LOCKS
8H–5
Front Outside Handle
Front Outside Handle and Associated Parts
635R200008
Legend
(1) Door Mirror Cover
(2) Power Window Switch
(3) Door Trim Panel
(4) Inside Lock Bracket
(5) Inside Handle
(6) Pull Box
(7) Pull Box Bracket
(8) Waterproof Sheet
(9) Door Lock Assembly
(10) Door Locking Cylinder
(11) Outside Handle
Removal
1.Disconnect the battery ground cable.
2.Remove the door trim panel.
B Refer to
Front Door Lock Assembly in this section.
3.Remove the waterproof sheet.
B Taking notice of the door harness, peel the
waterproof sheet off the door panel carefully.
4.Disconnect the locking links and remove the outside
handle.
5.Remove the fixing clip to remove the door lock
cylinder.
Installation
To install, follow the removal steps in the reverse order,
noting the following points:
1.Be sure to install the door lock cylinder at a specified
angle to the outside handle.
2.Check for smooth outside handle and lock cylinder
operation.
3.Tighten the outside handle fixing bolts to the specified
torque.
Torque 7 N·m (61 Ib in)