Workshop Manual

SECURITY AND LOCKS
8H–9
Rear Outside Handle
Rear Outside Handle and Associated Parts
655R200007
Legend
(1) Outside Handle
(2) Door Lock Assembly
(3) Pull Box Bracket
(4) Pull Box
(5) Door Trim Panel
(6) Power Window Switch
(7) Inside Handle
(8) Inside Lock Bracket
(9) Waterproof Sheet
Removal
1.Disconnect the battery ground cable.
2.Remove the door trim panel.
B Refer to Rear Door Lock Assembly in this section.
3.Peel the waterproof sheet.
B Taking notice of the door harness, peel the
waterproof sheet off the door panel carefully.
4.Disconnect the locking link and remove fixing bolts to
remove the outside handle.
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1.Check that the outside handle operates smoothly.
2.Tighten the outside handle fixing bolts to the specified
torque.
Torque 7 N·m (61 Ib in)