Workshop Manual

EXTERIOR/INTERIOR TRIM
8J–7
Removal
1.Disconnect the battery ground cable.
2.Remove the pull box.
B Remove the fixing screw.
655R200003
3.Remove the power window switch.
B Pry the power window switch (1) and remove the
connector.
655R200004
4.Remove the inside handle.
B Open the screw cover and remove the screw.
B Disconnect the cable.
655R200008
5.Remove the door trim panel.
B Remove the trim panel with the seven clips from the
door panel.
655R200005
B Disconnect the tweeter and the courtesy light
connectors.
6.Remove the inner waist seal.
7.Remove the tweeter.
8.Remove the courtesy light.
Installation
To install, follow the removal steps in the reverse order.