Workshop Manual

8J–10
EXTERIOR/INTERIOR TRIM
6.Remove the upper center pillar trim cover.
B Remove the cover (1) and screw.
B Remove the shoulder anchor cap (2) and upper
anchor bolt (3) from the front seat belt.
B Pry the trim cover with the clip from the body panel.
760R200006
7.Remove the front pillar trim cover.
B Ply the trim cover with the clips from the body panel.
8.Remove the tailgate weather strip.
9.Remove the rear end floor trim cover.
B Remove the four screw cover and nine fixing
screws.
10.Remove the rear roof trim cover.
B Pry the trim cover with the clips from the body panel.
11.Remove the tonneau cover assembly (1).
643R200001
12.Remove the multi hooks.
B While raising the notch of the hook with the
screwdriver, pull out the hook by turning 180°.
643R200004
13.Remove the lower quarter trim cover (1).
B Remove the lower anchor bolt cover (4) and the
lower anchor bolt (3) from the rear seat belt.
B Pull the trim cover at the five clip positions (2).
B Disconnect the accessory socket connectors (LH
side).
643R200006
14.Remove the upper quarter pillar trim cover (1).
B Remove the cover and screw, pull the trim cover at
the two clip positions (2).
B Remove the shoulder anchor cap (4) and upper
anchor bolt (3) from the rear seat belt.