Workshop Manual

EXTERIOR/INTERIOR TRIM
8J–11
15.Remove the upper rear pillar trim cover (5).
B Pull the trim cover at the six clip positions (6) from
the body panel.
643R200007
16.Remove the assist grip (1) (Front & Rear).
B Pull the assist grip downword.
B Remove the caps and fixing bolts.
743R200001
Installation
To install, follow the removal steps in the reverse order,
noting the following point:
1.Tighten the seat belt anchor bolt to the specified
torque.
Torque: 39 N·m (29 lb ft)