Workshop Manual

8J–22

EXTERIOR/INTERIOR TRIM

Power Window Motor

Driver Seat Side

Removal

1.Disconnect the battery ground cable.

2.Remove the window regulator assembly (2).

B Refer to the

Window Regulator and Glass removal

steps in Body Structure section.

3.Remove the power window motor (1).

B Remove three screws.

635R200007

Installation

To install, follow the removal steps in the reverse order.

Front Passenger Seat Side

Removal and Installation

Refer to the

Front Window Motor — Driver Seat side

removal and installation steps in this section.

Rear-Right Side

Removal

1.Disconnect the battery ground cable.

2.Remove the rear window regulator assembly (2).

B Refer to the

Rear Window Regulator and Glass

removal steps in Body Structure section.