Workshop Manual

SUPPLEMENTAL RESTRAINT SYSTEM
9J–19
J–39200 DVM
The J–39200 DVM is the preferred DVM for use in SRS
diagnosis and repair. However, J–34029–A may be used
if J–39200 is not available. No other DVMs are approved
for SRS diagnosis and repair.
901RS153
Scan Tool
The Tech 2 is used to read and clear SRS Diagnostic
Trouble Codes (DTCs). Refer to the Tech 2 Operator’s
Manual for specific information on how to use the Tech 2.
901RW176
J–35616–A Connector Test Adapter Kit
The J–35616–A Connector Test Adapter Kit must be used
whenever a diagnostic procedure requests checking or
probing a terminal. Using the appropriate adapter will
ensure that no damage to the terminal will occur from the
DVM prove, such as spreading or bending. The adapter
will also give an idea of whether contact tension is
sufficient, helping to find an open or intermittent open due
to poor terminal contact.
901RS151
J–42986 SRS Deployment Tool
The J–42986 SRS Deployment Tool must be used for
deployment of the undeployed air bag.
901RW106