Workshop Manual

RESTRAINT CONTROL SYSTEM
9J1–44
DTC 61 Warning Lamp Circuit Failure
Step Action Yes No
1 Was the “SRS Diagnostic System Check” performed?
Go to Step 2
Go to the “SRS
Diagnostic
System Check.”
2 1. Malfunctions within the “AIR BAG” warning lamp circuitry will
set this diagnostic trouble code.
2. These malfunctions are addressed in the “SRS Diagnostic
System Check” via Chart B and Chart C.
3. Failure to properly perform the “SRS Diagnostic System
Check” may result in misdiagnosis.
4. Ignition switch “ON.”
5. Clear SRS diagnostic trouble codes.
Is DTC 61 SET?
Ignition switch
“OFF.”
Go to Chart A .
Repeat the “SRS
Diagnostic
System Check.”