Workshop Manual

FRONT SUSPENSION
3C–17
6.Remove front nut.
7.Remove rear nut.
8.Remove torsion bar, refer to
Torsion Bar in this
section.
9.Remove torsion bar arm bracket.
10.Disconnect the stabilizer link at the lower control arm.
11.Remove the shock absorber lower end from the lower
control arm.
12.Remove the lower ball joint from the lower control
arm.
13.Remove front bolt.
14.Remove rear bolt.
15.Remove lower control arm.
16.Remove torsion bar arm bolt.
17.Remove lower ball joint bolt.
18.Remove front bushing by using remover J–36833.
901RW154
901RW155
19.Remove rear bushing by using remover J–36834.
901RW051
901RW052
Inspection and Repair
Make necessary correction or parts replacement if wear,
damage, corrosion or any other abnormal condition are
found through inspection.
Check the following parts:
B Lower control arm
B Bushing