Workshop Manual

3D–8
REAR SUSPENSION
Trailing Link
Trailing Link and Associated Parts
460RW005
Legend
(1) Bolt and Nut (Axle side)
(2) Protector (Left side only)
(3) Bolt (Frame side)
Removal
1.Remove the parking brake cable from the trailing link.
2.Remove the trailing link fixing bolt, nut and protector.
3.Remove trailing link.
Inspection and Repair
Make necessary correction or parts replacement if wear,
damage, corrosion or any other abnormal condition are
found through inspection.
1.Trailing link
2.Rubber bushing
B Remove the rubber bushing by using remover
J–39214.
901RW058