Workshop Manual

3D–32
REAR SUSPENSION
Stabilizer Bar
Stabilizer Bar and Associated Parts
460R200003
Legend
(1) Bracket and Bolt
(2) Link
(3) Nut
(4) Stabilizer Bar
(5) Rubber Bushing
Removal
1.Raise the vehicle and support the frame with suitable
safety stands.
2.Remove wheel and tire assembly. Refer to Wheel in
this section.
3.Remove nut.
4.Remove link.
5.Remove bracket.
6.Remove rubber bushing.
Inspection and Repair
Make necessary correction or parts replacement if wear,
damage, corrosion or any other abnormal condition are
found through inspection.
Check the following parts:
B Stabilizer bar
B Rubber bushing
B Link