Workshop Manual

0B–12
MAINTENANCE AND LUBRICATION
Maintenance Service Data
Service Data and Specifications
ENGINE
Valve clearance (cold) Intake 0.28±0.05 mm (0.011±0.002 in)
Exhaust 0.3±0.05 mm (0.012±0.002 in)
Spark plug type K16PR-P11/PK16PR11/RC10PYP4
Spark plug gap 1.05 mm (0.04 in)
BRAKE
Brake pedal free play 6–10 mm (0.24–0.39 in)
Parking brake travel 6–7 notches
WHEEL ALIGNMENT
Toe-in (Front) 0 to +2 mm (0 to +0.08 in)
Toe-in (Rear) 0±5 mm (0±0.2 in)
Camber (Front) 0°±30’
Camber (Rear) 0°±1°
Caster (Front) 2°30’±45’
Toe–Axis (Rear) ±1°
PROPELLER SHAFT Flange torque 63 N·m (46 lb ft)
WHEEL AND TIRES
Size P235/65R17
Wheel nut torque 118 N·m (87 lb ft)
Tire inflation pressure (Front) 180 kPa (26 psi)
* Tire inflation pressure (Rear) 180 kPa (26 psi)
* Unless otherwise specified on tire information label on the vehicle.
Approximate Capacities
Items Metric Measure U.S. Measure
Fuel tank 74 L 19.5 Gal.
* Crankcase
Oil Change with Filter 4.7 L 5.0 Qt
Oil Change without Filter 4.0 L 4.2 Qt
Coolant A/T 11.1 L 11.7 Qt
Transmission Automatic 8.6 L 9.1 Qt
Transfer 1.35 L 1.4 Qt
Axle
Rear 1.77 L 1.87 Qt
Front 1.25 L 1.33 Qt
Shift on the fly system 0.12 L 0.13 Qt
Power steering 1.0 L 1.1 Qt
Air conditioning (R-134a) 0.6 L 1.32 Qt
*Crankcase capacities shown are approximate refill capacities. After refill, recheck oil level.