Workshop Manual

3F–18
INTELLIGENT SUSPENSION
DTC2 Actuator Coil Over Current (Cont’d)
Step NoYesValue(s)Action
12 Replace the rear shock absorber RL.
— Go to Step 16 —
13 If all steps are correct, check the continuity between the
control unit connector C–46 terminal 1 and connector
terminal C46–4, C46–17, C46–5, C46–18, C46–6,
C46–19, C46–7, C46–20, C46–8, C46–21, C46–9,
C46–22, C46–10, C46–23, C46–11, and C46–24.
Is there continuity?
— Go to Step 15 Go to Step 14
14 Repair the circuit.
— Go to Step 16 —
15 Replace the control unit.
— Go to Step 16 —
16 1. Reconnect all components, ensure all components
are properly mounted.
2. Clear the DTC.
Was this step finished?
—
Go to “Basic
Diagnosis
Flow”.
Go to Step 16