Workshop Manual

3F–24
INTELLIGENT SUSPENSION
DTC5 Vehicle Speed Sensor Open Circuit or Short (Cont’d)
Step NoYesValue(s)Action
7 Repair the circuit between the connector H–6 terminal
16 and the control unit connector C–44 terminal 48 or
replace the control unit.
— Go to Step 8 —
8 1. Reconnect all components, ensure all components
are properly mounted.
2. Clear the DTC.
Was this step finished?
—
Go to “Basic
Diagnosis
Flow.”
Go to Step 8
About the vehicle speed sensor connector termainal 3,
Refer to section Wiring System in Body and Accessories .