Workshop Manual

HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
1A–5
C01RW001
Air Source Select Switch
Press this button to select either Fresh Air Intake or CIRC
(inside air circulation). There is an indicator light inside the
button. This light indicates that the CIRC mode is “ON”.
Fresh Air Intake is the default setting for both DEFROST
and FOOT/DEFROST.
Fan Control Switch
This switch controls the blower motor speed to regulate
the amount of air delivered to the defrost, foot, and
ventilation ducts:
1.L0
2.M1
3.M2
4.M3
5.HI
Temperature Control Switch
When the temperature control switch is in the “18°C
(65°F)” position, the air mix door closes to block the air
flow to the heater core.
When the temperature control switch is in the “32°C
(90°F)” position, the air mix door opens to allow air to pass
through the heater core and heat the passenger
compartment.
Selecting the desired temperature will control the air flow
through the heater core, allowing control of the cabin
temperature.