Workshop Manual

4A1–9
DIFFERENTIAL (FRONT)
Disassembly
1.Remove differential carrier fixing bolt.
2.Remove differential assembly.
3.Using holding fixture J–37264 and holding fixture
base J–3289–20, fix the differential assembly to the
bench.
425RS008
4.Remove bearing cap bolt.
5.Apply a setting mark to the side bearing cap and the
differential carrier then remove bearing cap.
425RS009
6.Remove differential cage assembly.
7.Remove side bearing outer race, after removal, keep
the right and left hand side bearing assemblies
separate to maintain inner and outer race
combinations.
8.Remove side bearing, using remover J–42379 and
adapter J–8107–2.
B Select insert; 303173 and collet halves; 44801 in
remover kit J–42379.
415RW003
9.Remove adjust shim, note the thickness and position
of the shims removed.
10.Remove the flange nut using holding wrench
J–8614–01.
415RS018