Workshop Manual

DIFFERENTIAL (FRONT)
4A1–10
11.Remove flange using a universal puller.
12.Remove the drive pinion assembly using a soft metal
rod and a hammer.
425RS012
13.Remove collapsible spacer.
14.Remove the inner bearing using remover J–42379.
B Select insert; 303173 and collet halves; 44801 in
remover kit J–42379.
415RW004
15.Remove adjust shim.
16.Remove oil seal.
17.Remove outer bearing.
18.Remove the inner bearing outer race (1) and the outer
bearing outer race (2) by using a brass bar and a
hammer.
425RS014
425RS015