Workshop Manual

4A1–11
DIFFERENTIAL (FRONT)
19.Remove damper and bracket.
425RW042
Reassembly
1.Using installer J–7817 and grip J–8092, install outer
bearing outer race.
415RW013
2.Using installer J–7818 and grip J–8092, install Inner
bearing outer race.
415RW014
3.Install adjust shim and adjust drive pinion mounting
distance:
1. Apply gear oil to the inner and outer drive pinion
bearing.
Clean the pinion setting gauge set.
Then install the gauge set together with the inner
and outer bearings.