Workshop Manual

4A2–10
DIFFERNTIAL (REAR)
Pinion Oil Seal
Pinion Oil Seal and Associated Parts
420RW013
Legend
(1) Flange Nut and Washer
(2) Flange
(3) Oil Seal
(4) Outer Oil Seal Slinger
(5) Outer Pinion Bearing (Cup and Cone)
Removal
1.Remove the rear propeller shaft. Refer to Rear
Propeller Shaft in this section.
2.Drain the rear axle oil.
3.Check and record preload with an inch pound torque
wrench. This will give combined pinion bearing, seal,
carrier bearing, axle bearing and seal preload.
425RW018