Workshop Manual

HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
1A–9
Heater Mode Control Link Unit
Disassembled View
860R200002
Legend
(1) Case (Mode Control)
(2) Heater Unit
(3) Mode Sub-lever
(4) Clip
(5) Door Lever
(6) Rod
(7) Mode Actuator
(8) Washer and Mode Main Lever
Removal
1.Disconnect the battery ground cable.
2.Drain engine coolant.
3.Discharge and recover refrigerant (with air
conditioning)
B Refer to Refrigerant Recovery in this section.
4.Remove heater unit.
B Refer to
Heater Unit in this section.
5.Remove mode actuator.
6.Remove the case (Mode control) from heater unit.
7.Remove washer and the mode main lever.
8.Remove rod.
9.Press the tab of the sub-lever inward, and take out the
sub-lever.
860RS006