Workshop Manual

4B1–7
DRIVELINE CONTROL SYSTEM
Shift On The Fly Controller
Shift On The Fly Controller and Associated Parts
828RY00003
Legend
(1) Nut
(2) SOF Controller
(3) Connector
Removal
1.Disconnect the battery ground cable.
2.Remove the front console assembly.
Refer to Consoles in Body and Accessories section.
3.Disconnect the connector from the controller.
4.Remove the nut.
5.Remove the controller.
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
Torque: Nut (1) 8 N·m (69 Ib in)