Workshop Manual

4B2–35

DRIVE LINE CONTROL SYSTEM (TOD)

Diagnostic Trouble Codes

Code Tech 2 code

(P code)

Item Diagnosis Check flow No.

12 — Start code Normal —

13 P1735 Ref Shorted GND 6

14 P1731 Front speed sensor Input abnormality (open, sig or com) 2

15 P1736 Ref Shorted VB 6

16 P1737 Front speed sensor Input abnormality 4

17 P1774 Inhibitor switch Input abnormality 8

21 P1716 TPS Shorted or disconnected wiring,

abnormality in input

23 — ECU CPU abnormality 1

24 P1733 Rear speed sensor Input abnormality (open, sig or com) 3

27 P1738 Rear speed sensor Input abnormality 5

28 P1760 ADC (+) & AXLE SW Output abnormality 10

31 P1721 EMC (+) Shorted VB, disconnected coil/wiring or

shorted GND

32 P1761 ADC (+) Shorted VB or disconnected wiring 11

33 P1762 ADC (+) Shorted GND 12

36 — ECU CPU abnormality 1

37 P1712 ECU CPU abnormality 1

38 P1714 ECU CPU abnormality 1

41 P1741 Hight-Low shift motor Shorted GND or disconnected wiring 13

42 P1773 Hight-Low shift motor User operation error (not failure) 14

43 P1743 Hight-Low shift motor Motor moving more than 5s 15

55 P1755 Hight-Low shift motor Input abnormality of motor position signal 16

TPS : Throttle Position Sensor

EMC : Electromagnetic coil

ADC : Shift on the fly (Axle Dis Connect)