Workshop Manual

4C–13

DRIVE SHAFT SYSTEM

Front Drive Shaft Joint

Front Drive Shaft Joints

Replacement

B Refer to

Front Drive Axle Assembly Replacement

this section, and refer to

Front Hub and Disc Overhaul

in Suspension

section.

Front Hub Bearing Preload Check

Check the hub bearing preload at the wheel pin.

New bearing and New oil seal:

19.6 – 24.5 N (4.4 – 5.5 lb)

Used bearing and New oil seal:

11.8 – 17.7 N(2.6 – 4.0 lb)

411RS011

Inspection Of Shift On The Fly System

Gear Oil

412RY00008

1.Open filler plug and make sure that the oil up to the

plug port.

If the oil is short, replenish with gear oil GL–5 grade.

2.Tighten the filler plug to specified torque.

Torque: 78 N·m (58 lb in)