Workshop Manual

4C–25
DRIVE SHAFT SYSTEM
12.Apply liquid gasket to the contact surface on the
actuator side.
412RW012
13. Align shift arm with the groove of sleeve and install the
actuator.
14.Tighten bolts to specified torque.
Torque: 9N·m(78 lb in)
15.Install front axle drive shaft and mounting bracket.
Tighten fitting bolts to specified torque.
Torque: 116N·m (85 lb ft)
16.Pour specified amount of differential gear oil to filler
plug.
Front Differential
Oil Capacity: 1.4lit (1.48US qt)
Actuator Housing
Oil Capacity: 0.12lit(0.13US qt)
17.Install filler plug through gasket and tighten to
specified torque.
Torque: 78N·m (58lb ft)