Workshop Manual

4C–33
DRIVE SHAFT SYSTEM
Play in Constant Velocity Joint
Position the shaft in a vise between two pieces of wood,
then secure.
Test for shaft movement by attempting to move back and
forth, and side to side.
Secure as needed.
401RW050
401RW049
Boot of Constant Velocity Joint
Check the following: boot (2) for crack, damage and
grease leakage, the boot band (1) for looseness and
damage, and both sides of the joint for gease leakage
coming from the cover press-in parts (3).
401RW048
401RW047