Workshop Manual

4C–56
DRIVE SHAFT SYSTEM
CAUTION: During bellows assembly, be sure to
insert both ends of the bellows into the BJ ASM and
shaft grooves.
412R100007
Legend
(1) Bellows
(2) Shaft
412R100013
Legend
(1) BJ ASM
(2) Bellows
8.Install band. Note the setting direction. After
installation, check Standard Caulk Measure.Use the
special tool pliers J–35910 to caulk the bands to the
specified value.
412R100012
Standard Caulk Measure
B 1.2mm (0.05in) <= (1) and (2) <= 4.0mm (0.16in)
B (1) – (2) or (2) – (1) <= 0.4mm (0.016in)
9.Install another bellows and fix band.
10.Install band. Note the setting direction. After
installation, check that the bellows is free from
distortion. (DOJ SIDE ONLY)
412RS017
11.Install another bellows and fix band.
12.Install the ball guide with the smaller diameter side
ahead onto the shaft.