Workshop Manual

4D2–8
TRANSFER CASE (TOD)
TOD Control Unit
826R200006
Legend
(1) Bracket
(2) TOD Control Unit
Removal
1.Disconnect the battery ground cable.
2.Disconnect the harness connector from the TOD
control unit.
3.Remove the bracket retaining nuts (3 pieces) and the
bracket with TOD control unit.
4.Remove the TOD control unit from the bracket.
Installation
1.Install the TOD control unit to the bracket.
2.Install the bracket with TOD control unit to the
chassis.
3.Connect the harness connector to the TOD control
unit.
4.Connect the battery ground cable.