Workshop Manual

4D2–16
TRANSFER CASE (TOD)
Clutch Pack and Clutch Cam (Transfer Case Assembly)
266RY00015
Legend
(1) Transfer Case Assembly
(2) Snap Ring
(3) Wave Spring
(4) Cam Pulley
(5) Cam Ball
(6) Cam and Coil Housing Assembly
(7) Thrust Bearing
(8) Armature Plate
(9) Insulator Washer
(10) Clutch Pack Assembly
(11) Lockup Fork Spring
Disassembly
1.Remove the lockup fork spring.
2.Remove the thrust bearing and cam and coil housing
assembly from the output shaft.
NOTE: When the cam and coil housing assembly is
removed, the cam balls may be detached together with
the housing. Pay attention not to lose the ball.
261RY00020