Workshop Manual

4D2–21
TRANSFER CASE (TOD)
Disassembly
1.Remove the spacer.
2.Remove the front tone wheel, lower drive sprocket,
drive sprocket and chain together from the front and
rear output shaft.
266RY00010
3.Remove the lockup collar assembly and lockup fork
together.
266RY00011
4.Remove the lockup hub.
5.Remove the thrust washer.
6.Remove the magnet from the strainer set position
together with the oil pump assembly.
266RY00012
7.Remove the output shaft.
8.Remove the cam and shaft rail assembly.
262RY00015
9.Remove the shift fork and rail assembly, and
reduction hub.
10.Remove the spring pin from the shift fork and rail
assembly.
11.Remove the shift fork assembly from the lockup rail.
12.Remove the front output shaft from the transfer case.