Workshop Manual

1A–40
HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
Condenser Assembly
Condenser Assembly and Associated Parts
875R200022
Legend
(1) Refrigerant Line
(2) Pressure Switch Connector
(3) Condenser & Receiver Tank Assembly
(4) Condenser Air Guide
(5) Front Bumper Assembly
(6) Engine Hood Front End W/Engine Hood Lock
& Bumper Stay
(7) Front Center Bumper Retainer
(8) Front Side Bumper Retainer (RH)
(9) Head Light (R/LH)
(10) Front Side Turn Signal Light (R/LH)
(11) Horn (R/LH)
Removal
1.Disconnect the battery ground cable.
2.Discharge and recover refrigerant.
B Refer to Refrigerant Recovery in this section.
3.Remove front bumper assembly.
B Refer to the
Front Bumper in Body Structure
section.
4.Remove front center bumper retainer.
5.Remove front side bumper retainer (RH).
6.Remove condenser air guide.
7.Remove engine hood front end with engine hood lock
& bumper stay.
B Apply setting mark to the engine hood lock fixing
position before removing it.