Workshop Manual

5C–34
POWER–ASSISTED BRAKE SYSTEM
302RW006
3.Carefyully use adjustable pliers to bottom the piston
into the caliper bore. Do not pull or twist the flexible
hose or damage will occur.
Install caliper assembly.
Set caliper assembly in place.
302RS008
4.Install lock bolt (5) and tighten the bolt to the specified
torque.
Torque: 74 N·m (54 lb ft)
302RW018
5.Install wheel and tire assembly, refer to Wheels and
Tires System in Section 3E.
6.Pump the brake pedal several times to make sure that
the pedal is firm. Check the brake fluid level in the
reservoir after pumping the brakes.