Workshop Manual

HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
1A–47
Duct Sensor, Evaporator Core and/or Expansion Valve
Disassembled View
874R200012
Legend
(1) Lining
(2) Expansion Valve
(3) O-ring
(4) Evaporator Assembly
(5) Lower Case
(6) Clip
(7) Attaching Screw
(8) Evaporator Core
(9) Duct Sensor
(10) Upper Case
Removal
1.Disconnect the battery ground cable.
2.Discharge and recover refrigerant.
B Refer to
Refrigerant Recovery in this section.
3.Remove evaporator assembly.
B Refer to Evaporator Assembly in this section.
4.Remove the duct sensor fixing clip.
Pull the sensor from the evaporator assembly.
5.Remove clip.
6.Remove attaching screw.
7.Remove upper case.
8.Remove lower case.
B Slit the case parting face with a knife since the lining
is separated when removing the evaporator.
874RS006