Workshop Manual

5C–105
POWER–ASSISTED BRAKE SYSTEM
Minimum wear dimension: 16.6 mm (0.654 in)
Refinish dimension: 16.97 mm (0.668 in)
420RW002
Rear Drum (In Disc) Inside Diameter
Check
Check the rear drum inside diameter by measuring at
more than two portions as shown in the illustration.
If the inside diameter is greater than the limit, replace the
rear rotor.
Standard: 210.0 mm (8.27 in)
Limit: 211.4 mm (8.32 in)
420RS035