Workshop Manual

5C–106
POWER–ASSISTED BRAKE SYSTEM
Rear Disc Brake Caliper Assembly (4×4 Model)
Rear Disc Brake Caliper Assembly and Associated Parts
306RW007
Legend
(1) Brake Flexible Hose
(2) Clip
(3) Lock Bolt
(4) Support Bracket
(5) Guide Bolt
(6) Pad Assembly with Shim
(7) Caliper Assembly
Removal
1.Raise the vehicle and support with suitable safety
stands.
2.Remove wheel and tire assembly, referring to Wheels
and Tires System in Section 3E.
3.Remove the bolt and gaskets, then disconnect the
flexible hose from the caliper and after disconnecting
the flexible hose (1), cap or tape the openings to
prevent entry of foreign material.
306RW008
4.Since the brake fluid flows out from the connecting
coupler, place a drain pan under the vehicle.
5.Remove lock bolt (3).
6.Remove guide bolt (2).
306RW009
7.Remove caliper assembly.
8.Remove support bracket with pad assembly and take
care not to damage the flexible brake hose when
removing the support bracket.
9.Remove pad assembly with shim and mark the lining
locations if they are to be reinstalled.