Workshop Manual

6A–52
ENGINE MECHANICAL (6VE1 3.5L)
014RW024
Legend
(1) Right Bank
(2) Left Bank
(3) Alignment Mark on Camshaft Drive Gear
(4) Alignment Mark on Camshaft
(5) Alignment Mark on Retainer
3. Tighten twenty bolts in numerical order on each
bank as shown in the illustration.
Torque: 10 N·m (87 lb in)
014RW031
5.Tighten bolt for camshaft drive gear assembly pulley
to the specified torque.
Torque: 98 N·m (72 lb ft)