Workshop Manual

ENGINE COOLING (6VE1 3.5L)
6B–11
Drive Belt and Cooling Fan
Drive Belt and Associated Parts
015RW005
Legend
(1) Crankshaft Pulley
(2) Generator
(3) Power Steering Pump
(4) Water Pump and Cooling Fan Pulley
(5) Idle Pulley
(6) Tension Pulley
(7) Drive Belt
The drive belt adjustment is not required as automatic
drive belt tensioner is equipped.
Removal
Move the tension pulley drive belt loosen side, remove the
drive belt.
Inspection
Check drive belt for wear or damage, and replace with a
new one as necessary.
Installation
Install cooling fan assembly and tighten bolts/nuts to the
specified torque.
Torque : 22 N·m (16 lb ft) for fan pulley and fan
bracket.
Torque : 7.5 N·m (66.4 lb in) for fan and clutch
assembly.