Workshop Manual

6D1–4
ENGINE ELECTRICAL (6VE1 3.5L)
7.To remove the jumper cables, follow the above
directions in reverse order.
Be sure to first disconnect the negative cable from the
vehicle with the discharged battery.
Battery Removal
061RX002
1.Remove negative cable (1).
2.Remove positive cable (2).
3.Remove retainer screw and rods (3).
4.Remove retainer (4).
5.Remove battery (5).
Battery Installation
1.Install battery (5).
2.Install retainer (4).
3.Install retainer screw and rods (3).
NOTE: Make sure that the rod is hooked on the body
side.
4.Install positive cable (2).
5.Install negative cable (1).