Workshop Manual

6D3–22
STARTING AND CHARGING SYSTEM (6VE1 3.5L)
4.Check for continuity between slip ring and rotor core.
In case of continuity, replace the rotor assembly.
066RS017
Stator Coil
1.Check for continuity across the stator coils. If no
continuity exists, replace the coils.
Resistance value at 20°C.
Standard: Approx. 0.07W
066RS034
2.Check for continuity across one of the stator coils and
stator core. If a continuity exists, replace the coil.
Standard: More than 1MW
066RS035
Brush
Measure the brush length.
Replace the brush if it exceeds the limit.
Standard: 18.0mm (0.709in)
Limit: 5.5mm (0.217in)
066RW024