Workshop Manual

6E–25
6VE1 3.5L ENGINE DRIVEABILITY AND EMISSIONS
PCM Pinout Table, 80-Way Red Connector – Row “S61 ∼ 80”
060RY00051
PIN PIN Function Wire Color IGN ON ENG RUN Refer To
S61 Intake Air Temperature
(IAT) Sensor Ground
YEL/GRN 0.0V 0.0V General Description and
Operation, IAT
S62 ION Sensing Module RED 1.555V 1.555V General Description and
Operation, ION Sensing
Module
S63 Bank 1 HO2S 2 High WHT 0.3V 0.1–0.9V General Description and
Operation, Catalyst Monitor
HO2S
S64 Bank 2 HO2S 1 High PNK 0.3V 0.1–0.9V General Description and
Operation, Catalyst Monitor
HO2S
S65 Bank 2 HO2S 2 High GRN 0.3V 0.1–0.9V General Description and
Operation, Catalyst Monitor
HO2S
S66 Transmission Fluid
Temperature Sensor
RED/BLK 0.5–4.9V
(depends on
temperature)
0.5–4.9V
(depends on
temperature)
4L30E T/Mission
S67 Exhaust Gas Recirculation
(EGR) Position Signal
GRY/RED 0.6V 0.6V General Description and
Operation, EGR Control
S68 Accelerator Position (AP)
Sensor 1
WHT 0.41–0.45V 0.41–0.45V On-Vehicle Service
S69 Throttle Valve DC
Motor(+: FWD)
GRN Duty Cycle Duty Cycle General Description and
Operation, ETC
S70 Not Used — — — —
S71 Not Used — — — —
S72 Ignition Feed RED/GRN B+ B+ Chassis Electrical
S73 Auto Cruise Main Lamp GRN/WHT B+ B+ Chassis Electrical
S74 Variable Intake Manifold YEL/BLK 0.0V B+ (rpm
3600 over)
General Description
S75 Canister Purge Cut
Solenoid Valve
RED/WHT 6.0V Tank
empty
5.7V Tank
empty
General Description and
Operation, EVAP
S76 Throttle Position (TP) 1
Sensor Signal
BLU 0.5–0.8V 0.5–0.8V (at
idle)
General Description and
Operation, TPS